Cyclone Filament Winding Machine

Little Hornet Super Hornet Spider Titan Cyclone Raptor Gantry

Electronic Fiber Tensioning Mechanical Fiber Tensioning Bookshelf Creels Resin Baths Digital Doctor Blade Infrared, Induction, Ovens Mandrel Extractors Cart Removal System Mandrels

Accustrand Software Composite Designer Software Flexwind Control

PET Center Retrofits Training

Contact Support Directions Lodging Glossary

About Us Careers Contact Us Request for Quotation

Filament Winders

• Little Hornet

• Super Hornet

• Spider

• Cyclone

• Titan

• Raptor

• Gantry

Cyclone Logo

A workhorse for multi-axis production winding is the Cyclone.

The Cyclone can be configured with 3 to 6-axes of computer controlled motion and employs all digital AC servo technology.

The Cyclone is also driven by our powerful Windows® based Flexwind control and Composite Designer pattern development software and is well optioned to meet your specific winding requirements.

Cyclone Brochure

Cyclone Filament Winder

3 to 6-axes of Computer-Controlled motion
All Digital AC Servo Technology
Modular Horizontal Carriage Bed
Helical Rack and Pinion Drive Systems
Can be configured with multiple spindles

Specifications

Options

• Spindle-Mandrel Rotation Axis-1	Diameter Range....... Spindle Capacity...... Number of Spindles..	1,2,3 or 4m [39 - 157"] std 2721 kg [6,000 lbs] up to 22,680 kg [50,000 lbs] 1-3
• Horizontal Carriage Axis-2	Carriage Stroke........ Maximum Speed...... Carriage Capacity.....	2.2 - 35.2m [87 1,386"] Note: 3m increments 1 m/sec [200 ft/min] 227 kg [500 lbs]
• Cross-feed Axis-3	Carriage Stroke........ Maximum Speed...... Carriage Capacity.....	std 760 mm [30"] up to 3000 mm [118"] 0.6 m/sec [125 ft/min] 227 kg [500 lbs]
• Eye Rotation Axis-4 (optional)	Stroke..................... Maximum Speed...... Inside Diameter........	± 180 degrees 150 RPM 254 mm [10"]
• Eye Yaw Axis-5 (optional)	Stroke..................... Maximum Speed.......	± 95° 360° / sec
• Elevation Axis-6 (optional)	Stroke..................... Maximum Speed......	± 380mm [15"] 1 m/sec [125 ft/min]

	Machine Control McClean Anderson's Flexwind machine control system is a PC based system that makes filament winding simpler, faster and more accurate. Since the system is PC-based, users can develop and edit programs right at the control with Composite Designer part development software - even while winding!

	Software McClean Anderson's Composite Designer is an advanced offline software programming tool used for designing and modeling complex filament wound structures. During part program development, winding simulations can be rendered with ease, allowing the users to analyze a multitude of winding scenarios in a matter of seconds.

Home / Contact Us / Careers / Site Map