Home / Filament Winders / Titan / Options

The Titan was specifically designed with the influence of our customers for an affordable yet dependable winder for the pipe market.

The Titan features 2 to 4-axes of computer controlled motion and is driven by the Flexwind machine control. The system is further enhanced with our Windows®-based Composite Designer pattern development software.

Titan Brochure

• 2 to 4-axes of computer controlled motion
• All Digital AC Servo Technology
• Modular Horizontal Carriage Bed
• Chain and Sprocket Drive Systems
• Can be configured with Multiple Spindles

Bookshelf Fiber Dispensing Creel 
Stationary fiber dispensing  creel.  Spools of fiber are placed onto shelving and fiber is redirected through a 
series of ceramic eyelets. Ideal for center-pull glass.

Traveling Festooning System
Helps guide the fiber Bookshelf Fiber Dispensing Creels and the machine's Horizontal Carriage and helps
minimize tangles and fiber damage on long carriage travels.

Mylar/Veil  Dispenser
Accepts material with 75 mm [3”] dia x 305-457 mm [12-18”] lg cores. Tension is adjusted  manually.

Sand / Aggregate Delivery  System
The sand delivery system allows for the controlled application of granular aggregate filler (such as sand
or a similar aggregate) during the winding process. Filler provides a quick and low cost means of building
up wall thickness of pipes and tanks while reducing material costs.

Drum or Fiber-Dip Type Resin Bath
Jacketed, stainless steel, resin bath assembly.  Used for metering and controlling fiber wet-out.  Baths are
made of a stainless steel/aluminum construction.

Re-circulation Liquid Type Resin Bath Heater
Heater consists of a built in heated reservoir  that pumps liquid through the lower jacket of the resin bath tank.

Electric Type Resin Bath Heater
Heater consists of heat pad located on the bottom of the resin bath tank.

Resin Drip Trays
Resin drip trays are positioned directly under  the machine spindle.

Resin Bath Stand
Free standing resin bath stand that can accommodate one Fiber-Dip Type or Drum Type resin bath  stand is
placed on the floor directly behind filament winding machine.

Uninterruptible Power Supply (UPS)                                                        
System maintains machine control power for up to 30 minutes in the event of main power failure.

Wireless Radio Control Pendant  
Allows operation of the filament-winding machine by means of a wireless pendant.  Aids and improves
machine operation for extended length machinery.

Hardwired Operator Control Pendant    
Allows operation of the filament-winding machine by means of a wired operator pendant.

Digital Auxiliary Outputs
Generates  programs for activating digital outputs during winding program execution. These programs
enable you to trigger output  states based on existing filament winding program states.

Bar Code Scanner
2D scanner allows the scanning of bar codes to load the associated part program.

Safety Edge (Bumper Switch)
Bumper switches are used to stop the machine in an  Estop state in the event the machine’s horizontal
carriage would strike a  foreign object.  Switches are located on  both headstock and tailstock sides of the
winder’s horizontal carriage.

Cable Pull-Switch
Cable that runs the length of the machine’s carriage bed located near the floor. Operator can step or pull
the cable to stop the machine in emergency situations. 

Horizontal Carriage Whisker Switch
Consists of fiberglass whiskers mounted to a rotary switch.  In the event the switch is activated, the
machine will stop in an Estop state.  Whisker switches are mounted on the  front-side or backside
of the machine's horizontal carriage. 

Single-Beam Photoelectric Safety Switch
Light beam runs between the machine's headstock and tailstock. When light beam is broken the machine
goes to an Estop state.