|
| |
The Raptor is custom designed just for you! This winder is for large scale, heavy weight, multi-axis filament winding.
The Raptor is driven by our powerful Windows® based Flexwind machine control and Composite Designer pattern development software and is well optioned to meet your specific winding requirements.
|
- 2
to 4-axes axes of Computer-Controlled Motion
- Modular
Horizontal Carriage Bed
- Chain and Sprocket Drive Systems
- Can be
configured with Multiple Spindles
|
|
| |
|
• Spindle - Mandrel Rotation
Axis-1
|
Diameter Range...............
Spindle Capacity...............
Number of spindles.........
|
1,2,3,4,or 5m [39 - 197"]
std 4536 kg [10,000 lbs] up to 45359 kg [100,000 lbs]
1
|
|
• Horizontal Carriage
Axis-2
|
Carriage Stroke.................
Maximum Speed...............
Carriage Capacity............. |
3 - 35m [118 - 1,378"] Note: 3m increments
1 m/sec [200 ft/min]
680 kg [1,500 lbs] |
|
• Cross-feed Axis
Axis-3 (optional)
|
Carriage Stroke.................
Maximum Speed...............
Maximum Capacity............ |
std 760 mm [30"] up to 2000mm 79"
1 m/sec [200 ft/min]
680 kg [1,500 lbs] |
|
• Eye Rotation Axis
Axis-4 (optional)
|
Stroke..................................
Maximum Speed...............
Inside Diameter................ |
± 180 degrees
150 RPM
254 mm [10"] |
| |
Machine
Control
McClean
Anderson's Flexwind machine control system is a PC based system
that makes filament winding simpler,
faster and more accurate. Since the system is PC-based, users
can develop and edit programs right at the control with Composite
Designer part development software - even while winding! |
| |
|
| |
Software
McClean
Anderson's Composite Designer is an advanced offline software
programming tool used for designing and modeling complex filament
wound structures. During part program development,
winding simulations can be rendered with ease, allowing the users to analyze a multitude of winding scenarios in a matter of seconds. |
| |
|
|
|
