McClean Anderson Resin Baths are designed for impregnating and metering the resin-to-fiber ratio. Baths are made of a stainless steel and can be easily disassembled for clean-up.

Don't forget to ask us about customizing!

Drum Type Resin Baths

Drum Type Resin Baths are designed for precise resin control. When the drum rotates a film of resin builds up. This film is then metered to the desired amount using a doctor blade.

With our optional Programmable-Digital Doctor Blade, alter resin amount anytime during the wind process. Also features Data Logging capability.

Fiber-Dip Type Resin Baths

Fiber-Dip Type Resin Baths are designed for high consumption resin environments.

Resin metering is controlled using a squeegee. After the fiber has been submerged in resin it passes through a squeegee where the excess resin is wiped off.

Optional:

• Digitally-Controlled Re-circulation Type Resin Bath Heater. Heater consists of a built in heated reservoir that pumps liquid through the lower jacket of the resin bath tank. Heat temperature range of 200º F [93º C].

• Digitally-Controlled Electric Type Resin Bath Heater. Consists of heated pads located on the bottom tray of the resin bath tank. Heat temperature range of 170º F [76º C].